Reply to Thread New Thread |
|
![]() |
#1 |
|
![]() See that picture above? It shows a new type of rocket engine design. Usually, fuel is pumped into a chamber where the chemicals ignite and are blown out the other end, creating thrust. The design pictured above does this in a new way: as the fuel is pumped into the chamber, it’s spun up, creating a vortex. This focuses the flow, keeping it closer to the center of the chamber. In this way, when the fuel ignite, it keeps the walls of the chamber cooler. So what, right? Here’s what: using this technology — developed for rockets for NASA, remember — engineers designed a way to pump water more quickly and efficiently for fire suppression. The result is nothing short of astonishing: One series of tests using empty houses at Vandenberg Air Force Base compared [this new] system with a 20-gallon-per-minute, 1,400 pound-per-square-inch (psi) discharge capability (at the pump) versus a standard 100-gallon-per-minute, 125 psi standard hand line—the kind that typically takes a few firemen to control. The standard line extinguished a set fire in a living room in 1 minute and 45 seconds using 220 gallons of water. The [new] system extinguished an identical fire in 17.3 seconds using 13.6 gallons—with a hose requiring only one person to manage.In other words, this new system put out a fire more quickly, using less water, and — critically — with fewer firefighters needed to operate the hose. This frees up needed firefighters to do other important tasks on the job, and therefore makes fighting fires faster and safer. http://blogs.discovermagazine.com/ba...-science-this/ |
![]() |
![]() |
#2 |
|
|
![]() |
![]() |
#3 |
|
|
![]() |
![]() |
#4 |
|
|
![]() |
![]() |
#5 |
|
|
![]() |
![]() |
#6 |
|
|
![]() |
![]() |
#8 |
|
|
![]() |
![]() |
#9 |
|
I shall have to ask my son who is an Lt. on the FD if he has heard of this. |
![]() |
![]() |
#11 |
|
|
![]() |
Reply to Thread New Thread |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|